Acceptance Mark

<< MAIN STORE PAGE

Click on Add to Cart buttons below to proceed with the purchase. We accept all major forms of payment. You will be redirected to PayPal secure web site to complete the transaction. Please review shipping and handling comments.

Click on the button below to view your shopping cart:


Standard Sensitivity Microphone (UPT_MIC1)

UPT_MIC1 is a standard sensitivity microphone that plugs into the timer. Trigger the timer with loud sounds. The microphone would be used for capturing popping balloons, impacts of used with ballistics.

The cable length is 6 ft. This microphone is compatible with all timer models.

P/N: UPT_MIC1

PRICE: $24.00

(plus taxes and shipping)

UPT_MIC1 - Standard Microphone

High Sensitivity Microphone (UPT_MIC2)

Enhance the sound triggering sensitivity of the timer with this microphone. The high sensitivity microphone provides approximately 20db boost over the standard sensitivity microphone.

The microphone is approximately 1.8" x 1" in size. The microphone connects directly to the timer.  It is powered from the timer and does not need any batteries.

The microphone contains a 1/4-20 threaded fitting so that you can mount it on your camera tripod.

The cable length is 6 ft. This microphone is compatible with all timer models.

P/N: UPT_MIC2

PRICE: $49.00

(plus taxes and shipping)

(color may vary)

UPT_MIC2 - High Sensitivity Microphone

Optical (Photo Transistor) Sensor (UPT_OS1)

UPT_OS1 is a simple photo-interrupter designed to detect existence/absence of an object. The sensor requires an off the shelf RED laser pointer (not included).

To operate it, point the laser light at the side of the sensor (there is a small opening on the side). The timer triggers whenever the beam is interrupted. The sensor is can be used with large and small objects.

The sensor is intended for indoor use. Strong light sources or sunlight may interfere with the sensor.  The sensor has a limited reaction time. Applications include detecting falling objects such as water drops.

The cable length is 6 ft. This sensor is compatible with all timer models.

P/N: UPT_OS1

PRICE: $24.00

(plus taxes and shipping)

UPT_OS1 - Optical Sensor

Optical Slot Sensor (UPT_OS2)

UPT_OS2 sensor is a stand alone photo interrupter. It is powered by the timer. The sensor connects to one of the external sensor inputs using a 2.5mm plug. The sensor contains its own infra-red light source. Blocking the slot triggers the timer.

The sensor is intended for indoor use. Strong light sources or sunlight may interfere with the sensor.  The sensor has a limited reaction time. Applications include detecting small falling objects such as water drops.

The cable length is 6 ft. Sensor slot 8-10mm. This sensor is compatible with all timer models.

P/N: UPT_OS2

PRICE: $35.00

(plus taxes and shipping)

UPT_OS2 - Slot Sensor

Infrared Beam Sensor (UPT_OS3A/B)

This sensor uses infrared light to detect objects in front of the sensor. The sensor does not require a reflector for it to work. This allows you to point the sensor in any direction, even upwards.

You can use the sensor to capture wildlife, sport events or social events. For example capture a bird as it lands on a bird feeder. Capture runners as they cross the finish line. Capture guests entering a wedding reception or a party. All this can be done unattended.

Sensor has a maximum range of 5m (16ft). The triggering range can be adjusted down to approx. 1m (3ft). Typical reaction time of the sensor is 20ms. The sensor can be used indoors and outdoors.

The sensor operates in stand alone mode as well as together with the timer:

When used stand alone, you can use a Pocket Wizard device to activate remote cameras or flashes in response to the sensor trigger. You can also use a camera motor drive cable directly with the sensor. The sensor has a 3.5mm jack on its side for cable connections.

When used with the timer, you can create repeated exposures, control dead time and exposure delay. The timer can trigger a camera or a flash. You sensor interfaces to the timer with the supplied 3.5mm to 2.5mm connector cable.

You can connect up to two sensors to the timer and use them in a cross beam configuration. The timer will activate your camera when an object is placed in the location where the two beams intersect.

There are two versions of the sensor available: UPT_OS3A and UPT_OS3B. Both sensors are identical except for the cables that are provided.

If you want to use the sensor with a timer, use UPT_OS3A.

If you want to use the sensor directly with a Pocket Wizard, use UPT_OS3B. This version is supplied with 3.5mm to 3.5mm connector cable. The sensor is also configured to automatically re-trigger every 1 sec (up to 30 times) when the beam is constantly interrupted.

The sensor contains a 1/4-20 threaded fitting so that you can mount it on your camera tripod.

The cable length is 6 ft. This sensor is compatible with all timer models.

The sensor requires a 9V battery (not included).

Tripod is not included. Pocket Wizard devices and motor drive cables are not included.

P/N: UPT_OS3A

NO LONGER AVAILABLE

 

 

P/N: UPT_OS3B

NO LONGER AVAILABLE

 

 

UPT_OS3 - Infrared Beam Sensor

Retro-Reflective Sensor (UPT_OS4)

UPT_OS4 is a retro-reflective sensor with an impressive range of 30ft (10m). The sensor is based on Omron E3G sensor, see http://www.omron-ap.com/product_info/E3G/index.asp

The timer triggers whenever the beam between the transmitter and the mirror is interrupted.

The sensor has a very quick reaction time of 1ms. It is powered from a wall mount transformer (international wall mount adapter is provided). Connect the sensor the Universal Photo Timer or to a Pocket Wizard. The sensor comes with 1/4-20 threaded fitting so that you can mount it on a tripod. The sensor is supplied with 6ft timer cable and 6ft 3.5mm to 3.5mm connector cable.

This sensor is compatible with all timer models.

P/N: UPT_OS4

PRICE: $499.00

(plus taxes and shipping)

Please note that this item is a special order. Please contact us before ordering to check the availability.

 

UPT_OS4 - Retro-Reflective Sensor

Passive Infrared (PIR) Motion Sensor (UPT_PIR1)

Expand timer triggering options with passive infrared motion sensor. This type of sensor is commonly used in home security alarms and is activated by movement of a person or animal.

The sensor is approximately 2.4" x 1.8" in size and contains a 6ft cable. The sensor connects directly to the timer using one of the external sensor inputs.  The sensor is powered directly from the timer and does not need any batteries.

The sensor may require 1 minute stabilization after powering up. The maximum range is 20 feet (wide angle). The sensor is not suitable for fast moving objects. It re-triggers automatically every few seconds if motion continues to occur.

The sensor contains a 1/4-20 threaded fitting so that you can mount it on your camera tripod.

This sensor is compatible with all timer models.

P/N: UPT_PIR1

PRICE: $69.00

(plus taxes and shipping)

(color may vary)

UPT_PIR1 - Passive Infrared Motion Sensor

Prices in US Dollars. Currency conversion done by PayPal. By purchasing the product, you are indicating acceptance of Terms and Conditions, Refund and Warranty that govern the sale of the product from Universal Timer Ltd.